JFE430LN
<Composition> 18Cr - Nb - ultra-low C (SUS 430LX)
comparison of corrosion resistance
Weldability
Corrosion resistance
- A stainless steel with enhanced corrosion resistance and weldability.
Applications
- Bicycle rims, silos, central heating pipes, etc.
Chemical composition
Type | Standards | Chemical composition (%) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
JFE Standards | JIS Standards | Correspoding EN Standard | ASTM AISI equivalent |
C | Si | Mn | P | S | Cr | Mo | Other | |
Weldability Corrosion resistance |
JFE430LN | ¡Ü 0.030 | ¡Ü 0.75 | ¡Ü1.00 | ¡Ü 0.040 | ¡Ü 0.030 | 16.00 - 19.00 | Nb 0.10 - 1.00 |
Mechanical properties
Type | Standards | Mechanical properties | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
JFE Standards | JIS Standards | Correspoding EN Standard | ASTM AISI equivalent |
Tensile test | Hardness test | Bend test | |||||
Yield strength N/mm² |
Tensile strength N/mm² |
Elongation (%) | Hv | HRB | Bending angle | Internal radius |
|||||
Weldability Corrosion resistance |
JFE430LN | ¡Ý 175 | ¡Ý 360 | ¡Ý 22 | ¡Ü 200 | ¡Ü 88 | 180¡ã | 1.0¡Á³Ù |
Physical properties
Steel grade | Density | Electrical Resistance | Magnetism | Specific heat | Thermal conductivity | Thermal expansion coefficient | Young¡¯s modulus | ||
---|---|---|---|---|---|---|---|---|---|
0 - 100¡æ | 100¡æ | 500¡æ | 20 - 100¡æ | 20 - 650¡æ | ¡Á10&²õ³Ü±è3; | ||||
g/cm³ | 10-6¦¸?³¦³¾ | (Annealed material) | ´³/°ì²µ?¡æ (cal /g-¡æ) |
W /m?¡æ (10-2³¦²¹±ô/³¦³¾-²õ±ð³¦-¡æ) |
10-6/¡æ | N/mm² | |||
JFE430LN | 7.70 | 60.5 | Yes | 460 £¨0.11£© |
23.1 £¨5.53£© |
26.3 £¨6.28£© |
10.5 | 12.2 | 196 |
<<Note>> Density in the table above is the actually measured value as a physical property.
In mass calculations for commercial transactions, JIS G 4310 ¡°Method of Mass Calculation for Stainless Steel Plates and Sheets, and Heat-Resisting Steel Plates and Sheets¡± will apply.
In mass calculations for commercial transactions, JIS G 4310 ¡°Method of Mass Calculation for Stainless Steel Plates and Sheets, and Heat-Resisting Steel Plates and Sheets¡± will apply.